Tomax SDS Plus Deep Core Drill Bit 14x600 mm

Tomax SDS Plus Deep Formwork Drill Bit 14x600 mm;

The Tomax SDS Plus Deep Formwork Drill Bit (14x600 mm) is a professional accessory specifically designed for drilling extra-deep holes in hard materials such as concrete, brick, and stone, particularly in the construction and formwork industry. Its 14 mm diameter and unusually long 600 mm (60 cm) length make it ideal for critical and deep fastening applications where traditional drill bits fall short.

User Information and Technical Specifications

This drill bit is specifically aimed at professionals who require depth and speed:

Dimensions:

Diameter (14 mm): Commonly used for chemical anchors, bolts, or plumbing pipes.

Length (600 mm): Its extra-long structure enables drilling deep holes, allowing for single-pass penetration through thick walls, concrete beams, or formwork systems.

SDS Plus Connection: Fully compatible with the most common impact drill (rotary hammer) system on the market. The SDS Plus system allows the drill bit to move freely on the shaft, transferring impact energy more efficiently and preventing slippage under torque.

Target Audience:

Construction and Formwork Specialists: Formwork fastening, rebar detection, and curtain wall concrete penetrations.

Plumbers (Sanitary and Electrical): Deep pilot holes for pipe and cable routing through thick walls.

Specialist Installers: Structural fastenings requiring the placement of chemical anchors or long mechanical anchors.

Area of Use and Sectors Used

Deep formwork drill bits are used at depths unreachable by standard drill bits:

Primary Areas of Use:

Formwork Fastening: Drilling deep holes for supporting steel rods or connectors in construction formwork.

Chemical Anchor Applications: Drilling long and deep chemical anchor holes, especially in critical locations such as bridges, high-rise buildings, and tunnels.

Pipe and Cable Penetrations: Creating passages for pipes and cable lines in thick walls composed of two or more layers.

Sectors Used:

Construction and Contracting: Rough construction, reinforced concrete, and structural reinforcement projects.

Plumbing and Mechanical Applications: Pipe and cable laying work on large construction sites.

Infrastructure Projects: Anchoring and fastening work in tunnel, bridge, and road construction.

Material Properties and Structural Details

For a length of 600 mm, material quality is crucial for both durability and centering:

Body Material: Manufactured from high-strength, impact-resistant special alloy steel. This long body is designed to minimize flex even under high vibration.

Flute Design: It has a deep and wide flute design optimized to efficiently transfer breaking force from the tip and, most importantly, to rapidly expel dust and debris from the drilled hole. This reduces friction and clogging, increasing drilling speed.

Centering: Since accurate drilling with long bits is difficult, it features a precise tip that ensures self-centering of the bit.