Master 505084 Chipboard Cutting Diamond Tipped Circular Saw Blade 185 mm 40 Teeth

Master 505084 Diamond Tipped Circular Saw Blade 185 mm 40 Teeth

Balanced Cutting Quality and Speed

The Master 505084 Chipboard Cutting Diamond Tipped Circular Saw Blade 185 mm 40 Teeth is a versatile professional blade designed to balance speed and cutting quality when cutting chipboard, MDF, plywood, and laminate panels. With a diameter of 185 mm, it is fully compatible with medium-sized circular saws, while its 40-tooth configuration offers both sufficient cutting speed and a cleaner, less prone to fraying finish compared to rough cuts.

This blade offers long-lasting durability thanks to the high-quality Tungsten Carbide (diamond tip) used on the cutting edges of its teeth. A 40-tooth count means a closer tooth spacing than a 24-tooth blade, resulting in less material removal and less chip-out on the edges of the cut material. This blade is particularly preferred for rough sizing of panels with visible surfaces and for finish carpentry work requiring a smoother finish.

Product Features

Feature	Detail
Product Name	Master 505084 Chipboard Cutting Diamond Tipped Circular Saw Blade
Dimensions	185 mm (Diameter)
Number of Teeth	40 Teeth (Balance of Speed and Quality)
Tooth Material	High-Strength Tungsten Carbide (Diamond Tipped)
Intended Use	Balanced Cutting, Chipboard, MDF, Plywood, Laminate, and Rough Timber
Compatible Device	185 mm Circular Saw Machines
Advantage	Near-smooth cut edge, versatile use, long life thanks to carbide tips

Application Areas and Industries

The Master 505084 Circular Saw Blade 185 mm 40 Teeth is used in all carpentry, furniture, and construction sectors where a good balance between speed and cutting quality is desired:

Industries

Furniture Manufacturing and Workshops: Preliminary sizing and quick cutting of panel materials such as MDF, chipboard, and plywood. Especially in cases where the veneered surfaces of panels must not be damaged during rough cutting.

Finish Carpentry (Finishing Work): Cutting of visible and more delicate wooden parts such as window sills, door frames, and subfloors.

Renovation and Interior Construction: On-site cutting of wood-based floor and wall coverings.

Exhibition and Booth Construction: Preparation of clean-cut panels for temporary structures that need to be quickly assembled and where panels are visible.

Applications

MDF/Chipboard Sizing: 40 teeth create a cleaner cut line than 24 teeth, reducing chip-out on the material edge, which shortens preparation time for subsequent processes.

Versatile Job Site Use: Offers the ability to work with a single blade for both cutting rough timber and sizing panels more cleanly, reducing the need to change blades.

Precise Cut Start: A high tooth count allows the saw to make a softer contact with the material, reducing vibration and providing a more controlled cut start.

Laminate/Veneer Cutting: 40 teeth prevent separation or tearing of laminate or thin veneer surfaces better than a 24-tooth blade, especially when cutting panels with these finishes.

About the Product 40 Teeth: The Golden Ratio of Balanced Cutting

40 Teeth: Quality Without Sacrificing Speed

A 40-tooth circular saw blade represents the ideal balance between speed and cutting quality in professional applications. This configuration sacrifices some of the aggressive cutting speed provided by 24-tooth blades, allowing each tooth to remove less material. This significantly reduces rough fraying and tear-out on the cutting edge. The Master 505084 is designed for craftsmen seeking a clean surface with minimum sanding or touch-up after cutting, especially for panel materials such as chipboard, MDF, or plywood.

Long-Lasting Performance with Carbide (Diamond) Tips

The high-quality Tungsten Carbide used on the tips of the blade's 40 teeth guarantees not only the blade's precision but also its durability. Panel materials can quickly dull blades due to their adhesive and resin content. Carbide tips show high resistance to these abrasive effects. Furthermore, they prevent the blade's teeth from being easily damaged when encountering foreign objects such as small nails or staples that may be found in a construction environment.

185 mm Diameter: Versatile Mobile Use

A 185 mm diameter offers a high cutting depth in portable circular saws while remaining lightweight and highly maneuverable. When this diameter is combined with a 40-tooth structure, the Master 505084 becomes a versatile cutting tool that can be used anywhere from the workshop to the job site. Users can achieve an acceptable finish quality even when switching between rough timber and thin panels.

Thanks to the clean and balanced cutting quality provided by its 40-tooth structure, the long life and durability of its carbide (diamond) tips, and the mobile and versatile use offered by its 185 mm diameter, the Master 505084 Chipboard Cutting Diamond Tipped Circular Saw Blade 185 mm 40 Teeth is an essential and indispensable cutting tool for all professionals in the furniture, carpentry, renovation, and interior construction sectors who seek a clean cutting solution without completely sacrificing speed.