Master 505075 Precision Cut Tile Ceramic Diamond Saw Blade 115x1 mm

Master 505075 Diamond Saw Blade 115x1 mm

Luxury Finish with Fine Cuts

The Master 505075 Precision Cut Tile Ceramic Diamond Saw Blade is a professional disc designed to make chip-free, crack-free, and laser-sharp smooth cuts, especially in the most delicate and fragile materials such as porcelain (granite ceramic), glass mosaic, glazed tiles, and marble. While its 115 mm diameter ensures perfect compatibility with standard angle grinders, its most critical feature is its 1 mm ultra-thin cutting thickness.

This blade combines a continuous rim edge structure for smooth cutting with a special perforated cooling body that prevents heat buildup in the material. The 1 mm thin kerf ensures that the material is cut with minimal waste and lowest vibration. The product should be used with wet cutting for maximum performance and blade life.

Product Features

Feature	Detail
Product Name	Master 505075 Precision Cut Diamond Saw Blade
Dimensions	115 mm (Diameter) x 1 mm (Thickness)
Cutting Type	Wet Cutting (For Ultra-Precise Applications)
Cutting Edge	Continuous Rim (Smoothness Guaranteed)
Body Feature	Perforated Steel Body for Cooling and Stress Reduction
Material	Premium Quality Industrial Diamond
Compatible Device	115 mm Angle Grinders (Spiral)
Purpose of Use	Porcelain (Granite Ceramic), Glass Mosaic, Glazed Tiles, Marble, Precious Stone
Advantage	1 mm ultra-thin cut for chip-free and crack-free surfaces, low waste, rapid cooling

Areas of Use and Which Sectors It Is Used In

The Master 505075 Diamond Saw Blade is an essential tool in luxury and professional applications where surface perfection, minimal waste, and highest aesthetic quality are absolute requirements:

Sectors

Luxury Interior Decoration and Renovation: High-cost and large-format porcelain, marble, and glass mosaic applications. Especially cuts in visible and eye-level areas.

Professional Tile and Ceramic Installers: Achieving factory-finish smooth edges in porcelain (granite ceramic) cutting.

Glass and Mosaic Craftsmanship: Cutting glass mosaic panels and special glass ceramics precisely without breakage.

Kitchen and Bathroom Countertop Production: High precision in edge finishing and miter (45-degree) cuts of marble, quartz, or thin granite slabs.

Plumbing and Lighting (Precise Installation): Small and precise cuts for outlets or lighting fixtures on tiled and ceramic surfaces.

Applications

Ultra-Thin Miter Cuts: Ensures a perfect corner joint (miter joint) by leaving zero chips in 45-degree cuts on ceramic and porcelain edges.

Safety in Fragile Materials: The 1 mm thin cutting thickness and continuous rim structure prevent crack formation in breakage-prone materials such as glass mosaic or glazed tiles.

Cost Savings: The thin kerf ensures less material waste, leading to significant material savings, especially with high-cost stone and ceramics.

Cooling Performance: The perforated steel body helps cool the blade quickly, supporting long-lasting and continuously high-performance operation.

About the Product 1 MM Thinness: The Key to Perfection in Porcelain Cutting

1 mm Kerf: Not Just Thinness, But Also Vibration Control

A 1 mm thickness in diamond saw blades is not just a measurement, but the pinnacle of precision and vibration control engineering. The Master 505075, thanks to this ultra-thin kerf, minimizes vibration during the cutting of hard and fragile materials like porcelain and marble. Reduced vibration brings the formation of micro-chips at the cutting edge close to zero. This is an indispensable feature, especially for miter (45-degree) cuts where aesthetics are critical.

Continuous Rim and Cooling Holes: A Dual Line of Defense

The blade's continuous rim is a guarantee of a smooth cutting surface. This rim is supported by a specially designed perforated steel body. These perforations rapidly dissipate the heat generated by the blade during cutting, slowing down disc deformation and diamond segment wear. Heat control prevents the risk of crack formation in the material, especially seen in dry cutting, while maximizing the disc's lifespan in wet cutting.

Luxury Finish and Economic Advantage

Choosing the Master 505075 not only provides an aesthetic advantage in luxury construction projects but also creates an economic advantage. The 1 mm thin kerf ensures less material loss compared to 2 mm or thicker discs. When working with high-cost porcelain or natural stone slabs, this reduction in waste for each slab translates to significant cost savings across the project. This blade combines smoothness, speed, and cost-effectiveness, making it the choice of the best tile setters.

The Master 505075 Precision Cut Diamond Saw Blade 115x1 mm, with the zero-chip and low-waste advantage provided by its 1 mm ultra-thin kerf, the smoothness of its continuous rim structure, and its special perforated cooling body, is an essential and indispensable cutting tool for all professionals seeking the highest level of aesthetics, precision, and economic efficiency in the luxury construction, glass, marble, and porcelain ceramic applications sectors.