Water-Based Special Formula for Smooth Concrete Surfaces, Maximum Formwork Lifespan, and Easy Release
One of the most critical stages in concrete pouring processes in construction projects is the undamaged removal of concrete from formwork after the curing (drying) time is complete. If a correct and high-quality formwork release agent is not used, the concrete will stick tightly to the plywood sheets or wooden formwork. Harsh physical impacts applied to remove the formwork result in both the expensive plywood material being fragmented and wasted and the formation of chipping, cracks, and aesthetically damaging voids on the concrete surface. Emulsion Plywood Formwork Release Agent 30 Lt, developed with water-based emulsion technology, creates a strong film layer between the concrete and the formwork with its environmentally and user-friendly structure, ensuring effortless release. Its 30-liter economical industrial drum packaging, highly efficient water-dilutable structure, and ability to achieve a smooth exposed concrete surface bring maximum labor speed, significant formwork savings, and professional construction quality to your construction sites.
Why Should You Choose Emulsion Plywood Formwork Release Agent?
For those who want to remove formwork undamaged in one go, extend the lifespan of plywood, and obtain flawless concrete surfaces that do not require plastering, this product offers the following strategic advantages:
Extends the Lifespan of Plywood Sheets: Prevents wooden and plywood formwork from rotting due to moisture and chemicals from concrete. Allows the formwork to be reused repeatedly without wear and tear or surface peeling, radically reducing construction site formwork costs.
Ensures a Flawless Exposed Concrete Surface: Does not cause stains, undulations, or spills on the concrete surface. When the formwork is removed, it leaves behind a smooth and aesthetic exposed concrete surface, directly ready for plastering and painting applications.
Water-Based, Environmentally and Worker-Friendly Formula: Unlike old-generation solvent-based chemical oils, it has a water-based emulsion (fluid) structure. It does not emit strong chemical odors, protects the health of construction site workers, and fully complies with environmental regulations.
Technical Strength: Easy Application, Water Dilution, and Rust-Preventive Protection
Thanks to its advanced chemical formula, it offers not only plywood protection but also technical details that increase construction site efficiency:
Economical Concentrate Structure Dilutable with Water: The product is mixed with water to form an emulsion. This allows for a much larger application volume from a single 30-liter drum. The consumption cost per square meter is at a minimum level.
Fast and Homogeneous Distribution: Can be applied to the formwork surface in seconds by spraying with a brush, roller, or an industrial sprayer pump. It does not run on the surface, creating a homogeneous and thin protective film layer.
Rust Protection for Steel Formwork and Reinforcement: Safely used in steel/metal formwork as well as wooden formwork in complex projects. It prevents rusting and oxidation of metal surfaces and does not harm the iron reinforcement (in terms of corrosion) within the concrete.
User Experience: Effortless Formwork Removal and Fast Construction Site Flow
When you incorporate Emulsion Plywood Formwork Release Agent into your construction projects, you will experience the following great comforts during and after application:
Tremendous Savings in Labor Time: Since the formwork does not stick to the concrete, masters do not lose time during the removal phase. The formwork virtually separates from the concrete surface on its own, which directly increases the overall progress speed of the construction site.
Easy Formwork Cleaning: After removal, no hardened concrete residues remain on the plywood sheets. It eliminates the hassle of scraping and cleaning done to prepare the formwork for the next pour.
Perfect Compatibility with Subsequent Applications: Since it does not leave oily, slippery layers on the concrete surface, it absolutely does not prevent the adhesion of subsequent thermal insulation (jacketing), mortar plaster, exterior paint, or waterproofing chemicals to the concrete.
Key Application Areas: From Foundation Walls to Precast Structures
This emulsion-based formwork release agent is the most basic consumable material in all scales of construction projects where concrete pouring is carried out:
Plywood and Wooden Formwork Systems: For lubricating the inner surfaces of all wooden and film-coated plywood formwork used in housing, business center, and bridge projects.
Tunnel Formwork and Steel Formwork Applications: For rapid removal of industrial tunnel formwork and steel panels used in high-rise buildings or mass housing projects.
Production of Precast Concrete Elements: In precast concrete factories, in the processes of smoothly removing concrete pipes, culverts, boundary walls, and precast structural panels from formwork.
Shaft, Column, and Shear Wall Concrete Pours: To achieve zero-defect exposed surfaces in the load-bearing systems of buildings, in elevator shafts and shear wall pours.
