{"product_id":"dmax-dmx4538-sds-kalipci-ahsap-matkap-ucu-12x600-mm","title":"Dmax DMX4538 SDS Formwork Wood Drill Bit 12x600 mm","description":"\u003cp\u003e\u003cb\u003eDmax DMX4538 SDS Formwork Wood Drill Bit 12x600 mm\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003e\u003cb\u003eSDS Plus Locking Power and High Chip Ejection Comfort for Deep Wood Drilling\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eThe biggest challenges in construction formwork, wood frame assembly, or joining thick wooden beams are standard drill bits getting stuck in deep surfaces, burning the wood, and requiring double-sided drilling due to insufficient length. Ordinary straight-shank bits slip in the chuck under high torque and cannot eject chips due to their inadequate spiral structure, stressing your drill's motor and bringing work to a halt. The \u003cb\u003eDmax DMX4538 SDS Formwork Wood Drill Bit 12x600 mm\u003c\/b\u003e is specially designed to provide a massive \u003cb\u003e60-centimeter drilling depth in a single pass with no chuck slippage and smooth lines\u003c\/b\u003e, even in the thickest wooden blocks. With its \u003cb\u003eideal 12 mm hole diameter\u003c\/b\u003e, \u003cb\u003eextra-long 600 mm body\u003c\/b\u003e, and \u003cb\u003eSDS Plus shank compatibility\u003c\/b\u003e, it brings maximum speed, power, and precision to your formwork and wood assembly projects.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eWhy Choose the Dmax DMX4538 SDS Formwork Wood Drill Bit?\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eFor those seeking non-deviating sharpness in thick wooden logs, an unbreakable flexible body structure, and full compatibility with rotary hammers, this product offers the following strategic advantages:\u003c\/p\u003e \u003cp\u003e\u003cb\u003eNon-Slip and Secure Locking with SDS Plus Shank:\u003c\/b\u003e Unlike traditional keyed or keyless chucks, the \u003cb\u003eSDS Plus input structure\u003c\/b\u003e allows it to snap into your rotary hammer in seconds. Even under high torque, it \u003cb\u003edoes not spin freely or slip in the chuck\u003c\/b\u003e, transmitting all the power generated by the motor directly to the bit.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eDeep Pass in One Go with 600 mm Extra Long Body:\u003c\/b\u003e The \u003cb\u003e60 Schubert (60 cm) total length\u003c\/b\u003e allows you to drill through layered formwork boards, thick roof beams, or wooden logs \u003cb\u003ein a single vertical pass\u003c\/b\u003e, without the need for front-to-back measurements.\u003c\/p\u003e \u003cp\u003e\u003cb\u003e12 mm Perfect Formwork Diameter:\u003c\/b\u003e It creates \u003cb\u003eclean, smooth, and burr-free holes exactly 12 mm in diameter\u003c\/b\u003e for tie-rods, connecting irons, and long assembly screws frequently used in formwork construction.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eTechnical Strength: Heat-Treated Carbon Steel and Special Chip Channels\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eDmax quality is designed to industrial standards to withstand the high friction heat and bending pressures created by wood during deep drilling operations:\u003c\/p\u003e \u003cp\u003e\u003cb\u003eHardened Steel Body with Flex Resistance:\u003c\/b\u003e Manufactured from high-quality \u003cb\u003ecarbon steel (HCS) and optimized with heat treatment\u003c\/b\u003e. Despite its extreme length of 600 mm, it \u003cb\u003edoes not bend or break\u003c\/b\u003e under vertical pressure and has high flex tolerance.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eSharp Geometry with Centering Tip:\u003c\/b\u003e The sharp guide tip located exactly in the center of the bit provides \u003cb\u003epoint-specific grip\u003c\/b\u003e on the wood surface upon initial contact. It completely prevents the bit from wobbling sideways or deviating from the target when you start the drill.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eWide Helix Flute Structure Preventing Clogging:\u003c\/b\u003e It features \u003cb\u003edeep helical channels that ensure rapid ejection\u003c\/b\u003e of accumulated chips and wood dust from deep holes. This prevents the bit from getting stuck inside and burning the wood, and minimizes the vertical load on the drill's motor.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eUser Experience: Non-Wobbling Lines, Fast Drilling Without Fatigue\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eWhen you incorporate the Dmax 12x600 mm SDS wood drill bit into your construction site and workshop equipment, you will experience these great comforts during application:\u003c\/p\u003e \u003cp\u003e\u003cb\u003eNo More Tedious Double-Sided Measuring:\u003c\/b\u003e It completely eliminates the problem of axial misalignment encountered when trying to drill a thick piece of wood first from the front, then from the back, and meet in the middle. You \u003cb\u003eenter from one side and exit from the back with a perfectly straight line\u003c\/b\u003e.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eClean Entry and Burr-Free Exit:\u003c\/b\u003e Thanks to the sharp geometry of its cutting edges, it cuts wood fibers without tearing them. It \u003cb\u003eminimizes splinter formation and wood blow-out\u003c\/b\u003e at both the entry and exit points of the hole.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eMaximum Speed with the Power of Rotary Hammers:\u003c\/b\u003e Since you use this bit with powerful SDS Plus rotary hammers (Hilti-type drills) instead of light cordless drills, you can drill even the hardest wood types (oak, beech, etc.) \u003cb\u003ein seconds, like pulling hair from butter\u003c\/b\u003e.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eMain Application Areas: Wherever Thick Wood and Formwork are Involved\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eThe Dmax DMX4538 Wood Drill Bit, with its deep drilling capability and high shank strength, is one of the most essential consumables in construction sites and the timber construction industry:\u003c\/p\u003e \u003cp\u003e\u003cb\u003eConstruction Formwork and Reinforced Concrete Systems:\u003c\/b\u003e For joining wooden formwork panels, curtain wall formwork, and \u003cb\u003edrilling lines for formwork tie-rods\u003c\/b\u003e.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eTimber House, Prefabricated, and Roof Construction:\u003c\/b\u003e For assembling roof trusses and \u003cb\u003elocking thick load-bearing wooden posts and beams together with long screws or bolts\u003c\/b\u003e.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eLandscaping and Wooden Scaffolding Manufacturing:\u003c\/b\u003e For securing thick wooden sleepers used in garden landscaping, and for \u003cb\u003einstalling wooden walkways and jetties by ponds or the sea\u003c\/b\u003e.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eRestoration and Heavy Carpentry Work:\u003c\/b\u003e For strengthening historical wooden buildings and \u003cb\u003edeep drilling operations of massive wooden logs and wooden frames\u003c\/b\u003e.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eTechnical Specifications and Product Summary\u003c\/b\u003e\u003c\/p\u003e \u003ctable border=\"0\" cellpadding=\"0\"\u003e \u003cthead\u003e \u003ctr\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eFeature\u003c\/b\u003e\u003c\/p\u003e \u003c\/td\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eTechnical Detail and User Advantage\u003c\/b\u003e\u003c\/p\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e\n\n\u003ctr\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eBrand \/ Code\u003c\/b\u003e\u003c\/p\u003e \u003c\/td\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eDmax \/ DMX4538\u003c\/b\u003e\u003c\/p\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eProduct Type\u003c\/b\u003e\u003c\/p\u003e \u003c\/td\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eSDS Plus Shank Formwork Wood Drill Bit\u003c\/b\u003e\u003c\/p\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eHole Diameter\u003c\/b\u003e\u003c\/p\u003e \u003c\/td\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003e12 mm\u003c\/b\u003e (Perfectly Compatible Diameter for Formwork Tie Rods and Screws)\u003c\/p\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eTotal Length\u003c\/b\u003e\u003c\/p\u003e \u003c\/td\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003e600 mm (60 cm)\u003c\/b\u003e (Extra Long Body Length for Deep Blocks)\u003c\/p\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eShank \/ Input Type\u003c\/b\u003e\u003c\/p\u003e \u003c\/td\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eSDS Plus\u003c\/b\u003e (Compatible with Rotary Hammers, Non-Slip Locking System)\u003c\/p\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eMaterial Structure\u003c\/b\u003e\u003c\/p\u003e \u003c\/td\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eHeat-Treated High Carbon Steel (HCS)\u003c\/b\u003e (Flex-Resistant)\u003c\/p\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eGuide Structure\u003c\/b\u003e\u003c\/p\u003e \u003c\/td\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eSharp Centering Tip Cutting Edge\u003c\/b\u003e (Prevents Deviation and Wobbling)\u003c\/p\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eChip Ejection\u003c\/b\u003e\u003c\/p\u003e \u003c\/td\u003e \u003ctd\u003e \u003cp\u003e\u003cb\u003eDeep Wide Helical Channels\u003c\/b\u003e (Flute Design Preventing Clogging and Overheating)\u003c\/p\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e","brand":"Dmax","offers":[{"title":"Default Title","offer_id":46455439687876,"sku":"DMX4538","price":183.72,"currency_code":"TRY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0752\/9355\/6932\/files\/73514DMX4538.webp?v=1792074160","url":"https:\/\/www.karadayihirdavat.com\/en\/products\/dmax-dmx4538-sds-kalipci-ahsap-matkap-ucu-12x600-mm","provider":"Karadayı Hırdavat","version":"1.0","type":"link"}